18650 cells

HΩ  WORK²
  • 2547mAh | 25.3A CDR | 35.8A @ 80oC cut-off

  • Can be charged at a tested/proven 3.82A rating: Yes, 3.82, as in THREE POINT EIGHT TWO. It is possible, tested, proven, and approved**

  • Phenomenal amperage delivery to drive power demanding devices

  • Purest form of Li-NMC (Nickel [Ni], Manganese [Mn], Cobalt [Co]) used to date

  • Exceeds all previous designs and chemistry results with greater amperage and capacity

  • EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential

  • Updated Poly Seal: Enhances security of seal & proper operation

  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

  • Ahead of schedule chem bonding to U-Mn specifications: one of many processes conducted to achieve documented specs

  • NEW chemical stimulation and unity process achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity

  • NEW meld process over 7kHz: results in charge rate capable of 3.82A

HΩ  ALONE
  • 3309mAh | 15.3A CDR | 19.6A @ 80oC cut-off

  • Can be charged at a tested/proven 4.14A rating: Yes, 4.14, as in FOUR POINT ONE FOUR. It is possible, tested, proven, and approved**

  • NEW NiMnCo Meld over 7kHz: process increases charging rate to 4.14A (1.25C) compared to standard 0.5C – 1C rates of Li-NMC formulation

  • Utilizing industry-unique QSP Li-NMC (4x raw compound wash)

  • Exceeds all previous designs and chemistry results with greater amperage-to-capacity ratio in 18650 format

  • EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential

  • Purpose-built to take on both high amperage and high capacity tasks simultaneously. Utilizing proprietary structure, top cap, and QSP chemistry in the Li-NMC family. More amps ~ cooler temps ~ even safer.

  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

  • Ahead of schedule chem bonding to U-Mn specifications: one of many processes conducted to achieve documented specs

  • Phenomenal amperage-to-capacity ratio to drive power demanding devices

  • NEW HT 5-brace embossed top to alleviate impostures from distributing fakes in the industry

  • Many proprietary processes conducted to achieve documented specs

HΩ  LIFE⁴
  • 3015mAh | 22.1A CDR | 31.5A @ 80oC cut-off

  • Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads

  • Designed to feed power-hungry devices without having to swap batteries every other minute

  • Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance

  • Exceeds all previous designs and chemistry results with greater amperage and capacity

  • A multitude of processes conducted to achieve documented specs

  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

  • Updated Poly Seal: Enhances security of seal & proper operation

  • Anti-Counterfeit ‘Ohm’ embossed top to stop knock-offs/clones

  • NEW Mn bonding process that achieves greater purity: Cycle Life is increased to over 70% nominal average of original capacity

  • NEW QSP NiCo Meld over 10kHz: process increases charging rate to 4.43A from previous 4.25A

20700 cells

  • 3116mAh | 30.7A CDR | 41.6A 80oC cut-off

  • Can be charged at a tested/proven 4.67A rating: Yes, 4.67, as in FOUR POINT SIX SEVEN. It is possible, tested, proven, and approved**

  • Originally developed and intended to power automobiles, it has been reformulated and equipped with a proprietary EPTC ring

  • Not reinvented, rather RE-formulated, achieving a unique blend new to Hohm Tech International

  • Since date of release, cell progression is up in all amperage and safety tests

  • EPTC (Enhanced Positive Thermal Coefficient) equipped: Reduction in Thermal Runaway potential

  • Updated Poly Seal from inception: Enhances security of seal & ensures it excels in various applications and environments

  • As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression

  • Ahead of schedule chem bonding to Li-Mn specifications

  • NEW bonding process that achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity

  • CoO2 coalesce process unlocks 1.5C charging rates

  • World’s First NAI 20700 (non automotive intent) extended with a backing of LLI, GLI, and PLI for robust protection from start to finish

SHERLOCK² HOHM

21700 cells

  • QSP Li-NMC | 39.1A-49.5A | 3023mAh | 3.6V

  • Can be charged at a tested/proven 5.29A rating: Yes, 5.29, as in FIVE POINT TWO NINE. It is possible, tested, proven, and approved

  • Purpose-built to exceed amperage capabilities of ALL previous non-QSP batteries

  • Utilizing our latest QSP Li-NMC processed chemistry; resulting in the purest chemistry to date

  • 39.1A CDR runs from 4.2V down to 2.5V @ under 76oC MAX (Neware Analyzer  |  Palmer Probes  |  22-25oC Ambient  |  No Moving Air)

  • Utilizing the proven compound in updated Poly Seal: Enhancing security of seal & proper operation

  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

  • Proprietary “Ohm” cap to ensure utmost authenticity!

  • QSP process that achieves greater end-product purity: Cycle Life 73% @ 500 cycles of nominal average capacity

  • QSP Li-NMC | 30.3A-38.6A | 4007mAh | 3.6V

  • Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**

  • Development started in 2017 with intent to only power Electric Vehicles.  It’s just too good to keep it restricted to only EV projects

  • Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure.  100% blend new to Hohm Tech International

  • >4k capacity, >30A load, in a structure under 72g weight!

  • Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications

  • As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression

  • QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology to

  • NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity

  • QSP unlocks consistent and reliable 1.5C charging rates

  • World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification

26650 cells

HΩ GROWN²
  • 4244mAh | 30.3A CDR | 41.1A 80oC cut-off

  • Can be charged at a tested/proven 5.30A rating: Yes, 5.30, as in FIVE POINT THREE. It is possible, tested, proven, and approved

  • Designed to feed insanely power-hungry devices without having to swap batteries every other minute

  • Now utilizing our latest Li-NMC chemistry with QS (4x Stripping) process; resulting in our purest chemistry to date

  • Exceeds all previous designs and chemistry results with greater CDR running at 8oC cooler than previous model

  • Updated Poly Seal: Enhances security of seal & proper operation

  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

  • Production date coding now on every cell (applicable to Grown2)

  • UPDATED bonding process that achieves greater end-product purity: Cycle Life @ 80% nominal average of original capacity